Description
Custom Shoulder Neck Flash Card Boxes
Custom shoulder neck flash card boxes combine a separate lid, a base and an inner collar. The lid and base meet with a flush exterior, while the collar guides the lid. This reference uses an angled-cut inner collar, giving the card compartment a sloping profile when the lid is removed. The structure can be developed for flash cards, activity prompts and other printed decks.
The printed lid provides cover artwork and side-panel space. The base and angled inner collar organize the card stack, with the exact cut line and printed surfaces specified for your design.
Structure & Component Fit
Develop the angled collar around the finished deck
Measure the complete card stack, including coatings, a leaflet and any band or wrapping. These dimensions guide the base capacity and collar position. The collar height, angled-cut profile and lid clearance are reviewed together so the closed exterior and open card compartment follow the approved sample.
Share the complete component list before the box dimensions are fixed. Dimensions, paper choices and assembly requirements are recorded in the approved project specification.
Flush-fitting lid and base
Review the alignment of the outer lid and base walls with the inner collar in place.
Angled-cut inner collar
Specify the sloping collar profile, cut position and exposed printed surfaces in the structural drawing.
Deck capacity
Set internal dimensions from the complete packed card stack and any included leaflet or band.
Card access
Check how the finished deck is gripped and removed around the collar during sample review.
Specifications & Material Options
Use these options to prepare your brief. The photographed sample shows a reference configuration; your final build follows the agreed quotation and sample.
| Box format | Shoulder and neck card box with a flush-fitting lid and angled-cut inner collar |
|---|---|
| Dimensions | Custom internal dimensions, developed from the finished packed components. |
| Material options | Wrapped rigid-board construction for the lid, base and inner collar; board thickness, wrap paper and any lining are confirmed after reviewing the deck dimensions and structural sample. |
| Printing & finishes | CMYK or Pantone printing; matte, gloss, foil or spot UV options reviewed against the selected material and artwork. |
| Interior options | Angled-cut inner collar as part of the box construction; optional paper bands, dividers and leaflet space are specified separately from that collar. |
| Supply scope | Packaging only, or a coordinated printed-component-and-box quotation. |
| MOQ | 500 sets. The contents of one set are defined in the confirmed quotation. |
| Samples & timing | Sample scope, cost and production schedule are confirmed after specification review. |
What We Review During Sampling
Sampling connects the artwork with the actual structure and component fit. The review scope is agreed before sample making.
- Lid-to-collar clearance and the closed outer alignment
- Angled cut-line position, collar height and wrapped-edge finish
- Capacity and access with the actual packed card stack
- Print direction on the lid, base and exposed collar
Choose the Supply Scope
Packaging Only
Request the custom box and specified interior components for cards or puzzle pieces you already source. Provide representative packed components or their confirmed measurements for fit review.
Printed Set & Packaging
Printed flash cards, activity cards and an instruction leaflet can be quoted with the box when specified. The quotation lists the exact components, printing, assembly and packing included in each set.
Frequently Asked Questions
How is the angled inner collar specified?
Provide the finished card dimensions and the preferred open-box profile. The collar height, sloping cut line, material and printed surfaces are defined in the structural drawing and reviewed with a sample.
Can you supply the flash cards and box together?
Yes. A coordinated quotation can include printed flash cards, a leaflet, the box and agreed packing steps. List the card count, paper, printing and exact components required in each set.
What is the minimum order quantity?
The minimum order quantity for this project format is 500 sets. The cards, puzzle pieces, inserts and accessories included in one set are specified in the quotation.
Plan Your Custom Packaging
Send your card or puzzle details, packed dimensions, quantity, artwork reference and delivery destination. Tell us whether you need packaging only or the printed components as well.
Request a Custom QuoteChat on WhatsAppExplore Games & Packaging
Review our packaging services and sampling and delivery FAQs when preparing your project.
You May Also Like
